background image

Important safety instructions

When using your Supercom 4400, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and
injury to persons.

Save these instructions!

1.

Read and understand all instructions.

2.

Follow all warnings and instructions on the Supercom 4400.

3.

Unplug the Supercom 4400 from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.

4.

Do not use the Supercom 4400 near water, for example, near a
bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.

5.

Do not place the Supercom 4400 on an unstable cart, stand, or
table. The Supercom 4400 may fall, causing serious damage to
the Supercom 4400.

6.

The Supercom 4400 should be operated only from the type of
power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your
dealer or local power company.

7.

Do not allow anything to rest on the power cord. Do not locate
the Supercom 4400 where people can walk on the cord.

8.

Do not overload wall outlets and extension cords. This
overloading can result in a fire or electric shock.

9.

To reduce the risk of electric shock, do not disassemble the
Supercom 4400, but take it to a qualified service person when
service or repair work is required. Opening or removing covers
may expose you to dangerous voltages or other risks. Incorrect
re-assembly can cause electric shock when the Supercom 4400
is subsequently used.

10.

Avoid using a telephone (other than a cordless type) during an
electrical storm. There is a remote risk of electric shock from
lightning.

4 •   I M P O RTA N T   S A F E T Y   I N S T R U C T I O N S

Содержание Supercom 4400

































































































Отзывы: