Ultratec Supercom 4400, Руководство пользователя

Страница: 32 / 96

Wait for response + +
Use the wait for response feature when the other person tells you to
hold. The Supercom 4400 will flash the ring flasher when the other
person starts typing again. Follow these steps to turn on wait for
response:
1.
When the other person types, “Hold please,” or something
similar, hold down the
and keys and press the key
( + + ). The display says WAITING.
2.
When you see the ring flasher flashing, the other person is
typing. Continue your conversation. The ring flasher will stop
when you start typing.
Using the relay voice announcer +
The relay voice announcer is a recording that tells a voice caller you
are answering with a TTY and that the call should go through a
relay service.
When the signal light flickers, telling you that someone is speaking
instead of typing, press
+ to turn on the relay voice
announcer.
A woman’s voice repeats “Please use text telephone or dial relay.”
You will see the message on the display at the same time. The
message stops when someone starts typing.
The relay voice announcer is programmable. It will tell the caller
what number to dial if you type in your relay service’s telephone
number by following the instructions
Saving relay information on the
next page.
V Ctrl
V Ctrl
W Shift Ctrl
W Shift Ctrl
W Shift Ctrl
3 0 • A DVA N C E D C A L L I N G