Ultrasonix SonixMDP, Руководство по обслуживанию

Страница: 151 / 182

SonixMDP/SP/OP Service Manual 00.053.101, Revision C Appendix A: Troubleshooting Solutions
A-1
APPENDIX A: TROUBLESHOOTING SOLUTIONS
All Chapter 12: Troubleshooting Issues that cannot be addressed through standard Service Manual procedures are handled in this
chapter.
A.1 SYSTEM NOT POWERING UP
A.1.1 Test System Power Up
To Test System Power Up:
1.
Ensure the system is plugged in, both the main power switch ( 3.3.3.1 ) and system power switch ( 3.3.6 ) are
turned on.
2.
If the system still does not power up, follow the remaining suggestions in Appendix 12.1 before contacting
Ultrasonix for further instructions.
A.2 SYSTEM HAS POWER BUT IS NOT POWERING UP
A.2.1 Check Internal Modulo Power Connections
Refer to 7.4 Replacing the Modulo for details on accessing the modulo:
Table A-1: Internal Modulo Power Connections
Figure A-1: Internal Modulo Power Connections
Item Description
1
LCD display power cable
2
UPS input power cable
Note: Only available on systems with an installed UPS.
3
UPS output power cable
Note: Only available on systems with an installed UPS.
Note: The LCD display power cable ( 1 ) is color coded with green tape.
System Power Connection
EMI Filter
1
2 3
1
2 3