Ultrasonix SonixMDP, Руководство по обслуживанию

Страница: 128 / 182

Chapter 11: Maintenance 00.053.101, Revision C SonixMDP/SP/OP Service Manual
11-2
11.2 SYSTEM CLEANING
Ultrasonix recommends the following cleaning instructions for all external surfaces, including the cart, cables and connectors.
11.2.1 LCD Display and Cabinet
11.2.1.1 LCD Display Cabinet
Apply a small amount of one of the following recommended cleaning solutions to a soft, non-abrasive cloth and
wipe down the cabinet:
• water
• mild detergent (PH level at or near 7) and water solution.
11.2.1.2 LCD Display Screen
Apply a small amount of water to a soft, non-abrasive cloth. Stroke the cloth across the display in one direction,
moving from the top of the display to the bottom.
• water
• mild detergent (PH level at or near 7) and water solution.
Cautions:
Power off and unplug the system before cleaning.
Do not spill or spray water on the controls, transducer connection receptacle, or transducer ports.
Cautions:
Power off and unplug the system prior to cleaning the LCD display.
DO NOT apply cleaning solutions directly to any surface of the LCD display or cabinet.
Caution: Computer wipes may be used only if they specifically state they are designed for LCD displays.
Cautions:
DO NOT scratch the LCD display.
DO NOT use paper towels to clean the LCD display as they may cause damage and scratches.
NEVER use cleaning products containing any of the following on either the cabinet or the screen:
• Abrasives
• Acetone
• Alcohol (Ethanol, Methanol or Isopropyl)
• Ammonia
• Benzene
• Solvents
• Wax.