Ultrasonic Ultra 3200FA, Руководство по эксплуатации

Страница: 9 / 17

UltraSonic LLC. Model Ultra 3200FA
9
press Up/Down Buttons to set Seconds, press Menu
Button to save press Up/Down Buttons to set Day, press Menu
Button to Save. Press UP Button to move to next setting.
•
Exit: Press menu key to Exit
NORMAL OPERATION

Make sure solution is at operating temperature.

Arrange parts in baskets & lower basket into solution.

Push green Cycle Start button on the front of the machine.

Close lid when not loading/unloading parts.

When ultrasound turns OFF, Filtration will turn on automatically to skim off any
surface oils & contaminants into the weir tank.

Remove basket. NOTE: Parts are hot, use proper protective equipment to prevent
exposure.
MAINTENANCE

Preventative - There is a minimum of preventive maintenance required. The overall
environment around the unit needs to be kept clean, dry and dust free.

Routine - Filter Element should be replaced when the pressure gauge indicates rise in
pressure or the flow from the spray bar located in the front of the main tank is slowed.
Most users regularly replace their filter each month to avoid any decrease of flow.
Solution should be replaced regularly to avoid a drop in cleaning performance that
will result from too many contaminants in the solution.
NOTE: Consult your UltraSonic LLC representative for recommended schedule for
filter and solution changes based on your application.