UltraLift Spider 70, Руководство по эксплуатации продукта

Страница: 7 / 14

1. Determine where on the ceiling you wish to install the projector mount.
Keep in mind that the top of the projector will be approximately 95mm below
the ceiling, so locate the mount a suitable distance from the projector screen,
taking the throw of the projector into account.
2. Loosen the three ball stud bolts until the ball stud can be removed from the
slotted lock ring. Remove the ball stud from the lock ring through the slot in
the lock ring.
3. The Spider 70 will now be separated into two pieces as shown below.
4. Once you have located a suitable spot on the ceiling, place the ceiling mount
plate flush against the ceiling, and mark the four holes using the ceiling mount
plate as a stencil.
5. Remove the ceiling mount plate from against the ceiling.
INSTALLATION
Installation Procedure
Page 7
Top Piece
Bottom Piece