UltraLift Spider 70, Руководство по эксплуатации продукта

Страница: 9 / 14

10. Fasten the Spider Arms to the projector using the mounting screws that came
with the projector. If none were supplied with the projector, you will need to
find suitable screws for your model and use them.
11. Once the projector is securely fastened to the Spider Arms, reconnect the
lower portion of the Spider 70 to the upper portion which was fastened to the
ceiling in step 8. You will need to slot the Ball Stud Thread through the slot in
the Slotted Lock ring, and tighten up the three bolts on the Slotted Lock ring to
secure the projector into place. The Ball Stud can be pivoted so the projector is
facing up to 20 degrees towards the floor so some adjustment may be required
for optimal positioning.
12. Optional: If you need to fine tune the direction the projector is facing, and you
followed Step 6 of this guide, you may loosen the bolt at the top of the Ball
Stud Thread and turn the Ball Stud clockwise to change the direction it is
facing.
INSTALLATION
Installation Procedure (Continued)
Page 9