SPECIFICATIONS
SPECIFICATIONS
TROUBLESHOOING continued
- 18 -
- 19 -
Power Source :
24Vac, 50/60Hz or 12Vdc
Power Consumption :
4.5W
CCD Pickup Element :
Interline transfer 1/3” CCD
Effective Pixels :
768H
494V
Sync Mode :
Line-Lock / Internal
Signal System :
NTSC
Scanning Area :
6.00(H)
4.96(V)mm
Scanning Frequency :
Horizontal 15.743kHz
Vertical 59.94Hz
Minimum IIIumination :
0.8Lux at F1.2,50 IRE(AGC ON)
Resolution :
470 TV lines
Video Output :
1 Vp-p, 75
, unbalanced
Backlight ON/OFF
Selectable
Compensation :
Auto-iris lens outputs
Video type lens - Luminance signal
1Vp-p, high impedance, power supply
12VDC 50mA
DC type lens - Coupling coil
impedance
Auto Elecrtonic Shutter :
ON/OFF Selectable (1/60~1/100,000
sec)
White Balance :
ATW/AWC Selectable (2,400K ~
1/10,000 K)
Lens Mount :
C/CS-Mount changeable mechanism
Continued on next page.
PROBLEM CHECK
The color of the picture is not
Is the white Balance feature set
matched.
properly?
The contrast on the screen is
Adjust the contrast feature of the
too weak.
monitor
Is the camera exposed to strong
light? If so, change the camera
position.
The image on the screen
Does the camera face directly into
flickers.
the sun or fluorescent lighting?
If so, reposition camera.
Is the DC/VIDEO switch on the back
of the camera set to the proper
position according to the type of
auto iris lens?
The image on the screen
Is the power frequency set properly
is distorted.
in Sync? If the power frequency is
not set correctly, the linelock
synchronization mode cannot be
used. Set the Synchronization Mode
to INT.
NTSC model power frequency in LL
mode : 60Hz.
