CAMERA - BACK
CAMERA - SIDE
- 3 -
- 2 -
Power indicator
Video output
connector
Lens connector
Lens select
switch
Power input
terminal
Setup switch
DC Iris level
volume
Ground terminal
1. Video Output Connector - BNC connector that
outputs a composite video signal.
2. Setup Switch - Switch for camera setup according to
the operating circumstances.
3. DC Iris Level Control - Adjusts the brightness of the
picture when using the DC type auto iris lens.
4. Power Indicator - Lights up when the camera is
powered.
5. Lens Connector - When using an auto iris lens,
connect the lens cable to this connector.
6. Lens Select Switch - when using an auto-iris lens,
set the switch according to the lens type.
VIDEO : Setting for video type lens.
DC : Setting for DC (gavanometric)type lens.
7. Power Input Terminal - Connect to a 24Vac or
12Vdc power source. When operating with a 24Vac
power supply, use only an isolated power source. (Do
not connect the power source until all other
connections are completed.)
8. Ground Terminal - Terminal for grounding cameras.
9. Phase control Volume - Adjusting the phase of line-
lock synchronization under the line-lock mode
operation.
Phase control volume
1. Lens Mount - Mount for installing the lens. C-mount
lens can be used when C-mount adapter is attached,
and CS-mount lens can be used when it is removed.
2. Back-focus Lock Screw - A screw provid to fix the
lens mount.
3. Lens Mount Cap - Be sure to cap the lens mount
when the lens is not mounted.
4. C-mount Adapter - Used to mount a C-mount lens
and removed to mount a CS-mount lens. Turn
conterclockwise to remove it.
5. Mounting Base - Mounting base for installing the
camera.
C-mount adapter
Lens mount cap
Back-focus screw
Lens mount
KC7400CN
Tripod mounting base
