INSTALLING LENS continued
INSTALLING LENS continued
INSTALLING LENS
- 6 -
- 7 -
DC iris lens - Set lens switch to DC.
Connect the lens cable of the galvanometric type lens.
If the plug on the cable is of a different type, replace it
with the provided 4-pin iris plug.
Attach a lens cable when using the DC type lens or
VIDEO type lens.
When using a manual lens, set the ESC switch (rear
panel) to ON.
When using the VIDEO type lens, adjust the image
brightness using the control on the lens.
When using the DC type lens, adjust the image
brightness using the control on the rear panel.
Pin Assignment : DC type (4-pin)
Pin No.
1
2
3
4
Signal
Damping coil(-)
Damping coil(+)
Drive coil(+)
Drive coil(-)
1
2
3
4
1
3
2
4
Drive coil(-)
Drive coil(+)
Damping coil(-)
Damping coil(+)
The lens is not supplied with this camera.
Purchase a lens suitable for your environment.
This camera accepts both C- and CS-mount lenses.
1. When using an auto iris lens, install the lens plug onto
the lens cable as follows:
Video type lens - Set lens switch to VIDEO.
Connect the lens cable of the video type lens.
If the plug on the cable is of a different type,
replace it with the provided 4-pin iris plug.
1
3
2
4
+12V
Video input
GND
N.C
IMPORTANT : If the lens is stained with fingerprints or
other substances, the image quality may be poor.
A high quality lens is recommended to improve the image
quality under low illumination.
Installing
Auto Iris
Lens
