Ultrak CRX-501, Инструкция по установке и эксплуатации

Страница: 50 / 65

3-1
SECTION 3. OPERATION
3.1 GENERAL
This section describes the controls and indicators on the receiver and the
operation of the CRX-501 and CRX-502 receiver.
3.2 CONTROLS AND INDICATORS
The only controls on the receivers are described in the setup procedures in
Section 2. The operational indicators are shown in Figures 3-1 and 3-2. A
description of each indicator follows the figures. Figure 3-1 shows the mother
board assembly and Figure 3-2 shows the expansion board assembly.