background image

PN 30A170 rev Jan2008

6

A. Warranty

ULTRAFRYER

®

 LIMITED WARRANTY:  PAR-3 GAS, ELECTRIC

Ultrafryer Systems warrants to the original purchaser of a gas or electric Ultrafryer® sold within the United States, its 

territories and Canada, that it will be free of defects in material and workmanship for the periods listed below:

STAINLESS STEEL FRYER VAT – 

Stainless Steel fryer vats are warranted for (10) ten years upon the terms hereinafter 

described. The (10) ten year warranty coverage applies ONLY to the Stainless Steel fryer vat and does not apply to the other 

components such as controls, fire boxes, gaskets, mounting hardware, or the heat shield weldment. The (10) ten year limited 

warranty coverage for the Stainless Steel fryer vats are as follows: (1) Vats that fail due to faulty workmanship or materials 

within the first twelve (12) months from the date of initial start up will be exchanged at no cost. Standard delivery ground 

freight will be prepaid by Ultrafryer Systems

 for first year failures only

. The cost of labor to install the replacement vat will 

be covered by Ultrafryer Systems for vats, which fail within twelve (12) months from the date of initial start up.  Labor for vat 

replacements after the first year is the responsibility of the owner (2) Vats that fail within the second through fifth year will be 

exchanged at $250.00 FOB San Antonio. (3) Vats that fail within the sixth through eight year will be exchanged at 50% of cur-

rent selling price of said vat FOB San Antonio. (4) Vats that fail within the ninth through tenth year will be exchanged at 70% 

of the current selling price of said vat FOB San Antonio. (

Example

: If the current selling price for a particular vat is $2,000.00, 

then a failure during the sixth through eighth year would be exchanged for $1,000.00; if the failure occurred in the ninth or tenth 

year it would be exchanged for $1,400.00.) Proper credit issue for vat failures is contingent upon receipt, by Ultrafryer Systems, 

of the serial number identification tag for any failed vat.

ULTRAFRYER PARTS – 

All parts on the Ultrafryer® are covered for a period of one (1) year from the initial date of start up. 

This is to include gas valves, switches, thermostats, etc. Ultrafryer Systems reserves the right to charge for certain parts such as 

computers, filter pumps and motors or any item over the amount of $100.00 until Ultrafryer Systems receives the defective part 

back

.  

After inspection, credit for the part will

 

be issued to the purchaser provided the part is deemed defective and that 

defect is not the result of neglect or abuse by the user

. The shortening filtration system, (hoses) are warranted for ninety (90) 

days from the initial date of start up. 

PROCESSING WARRANTY CLAIMS – 

The equipment owner must promptly notify Ultrafryer Systems Warranty Depart-

ment of any alleged defects as soon as they are discovered by calling 1-800-525-8130. After such notice, the Warranty Depart-

ment will perform its obligation under this warranty within a commercially reasonable period of time. If alleged defects develop 

after normal business hours, on weekends or on holidays the owner must call Ultrafryer Systems first at the above number. This 

number is monitored 24 hours a day, 7 days a week. Ultrafryer Systems will notify an authorized service agent to make repairs 

during normal hours or after hours. Any parts that need to be shipped back to Ultrafryer Systems will be shipped back 

prepaid 

by the customer

 marked with the processing number and to the

 

attention of the WARRANTY DEPARTMENT. 

NON WARRANTY COVERAGE – 

This warranty does not include coverage for any consequential cost of damages including, 

but not limited to, any loss in store sales, spoiled food products, transportation, duty or custom cost. This warranty does not 

cover the Ultrafryer® exported to countries outside the United States and its territories. This warranty does not cover original 

installation and adjustments such as leveling, calibrations and electrical and gas connections. This warranty does not cover travel 

over 100 miles or 2 hours driving time from the location of the Ultrafryer® or overtime or holiday charges unless the Warranty 

Department granted prior approval. This warranty does not cover damage due to misuse, abuse, alteration or accident. This 

Warranty does not cover improper or unauthorized repair or installation, damage in shipment, normal maintenance items such as 

gaskets, hoses, and exterior finishes. Ultrafryer Systems will begin the fryer warranty one week after shipment but will adjust the 

warranty upon receiving approved documentation.  We reserve the right to void component part warranty on any Ultrafryer that 

is stored more than six (6) months after shipment from Ultrafryer Systems and not put into service.

LABOR COVERAGE – 

The cost for labor to replace parts are covered for one (1) year after the initial start up. 

The Warranty 

Department must be promptly notified of any defects within the first year of operation

.

 The labor warranty does not include 

the cost to repair or clear dirty

 

filter systems or perform any adjustments that would normally fall

 

under the tasks associated with 

a proper start up and/or demonstration.  

Labor is covered by Ultrafryer Systems for repairs by an AUTHORIZED service 

agent

.  Owner is responsible for all costs associated with fryer installation and start up unless prior arrangements have been 

made with Ultrafryer Systems.

 

DISCLAMIER OF WARRANTIES

Other than as stated herein, ULTRAFRYER SYSTEMS makes no warranty of any kind, express or implied, including 

but not limited to any warranty of merchantability of fitness for a particular purpose, including trade usage. Ultrafryer 

Systems’ sole obligation, and purchaser’s sole remedy, under this warranty is repair or replacement, at the discretion of 

Ultrafryer Systems, of any part or component that proves to be defective in materials or workmanship. In no event shall 

Ultrafryer Systems be liable for consequential, incidental, or special loss or damages arising from the use of, or inability 

to use, the ULTRAFRYER®. This limited warranty is the only and complete statement with respect to warranties of 

NEW Ultrafryer®  PAR-3 Gas and Electric ULTRAFRYERS® sold after June 1st, 2000. There are no other documents 

or oral statements for which Ultrafryer Systems will be responsible.  Effective 2-1-2008.

Содержание F-P-30-14











































Отзывы: