Ultraflux Uf 841, Руководство пользователя

Страница: 40 / 105

40
NT UF 841 CP GB (d) / June 2015
The level can be changed by selecting the menu option Configuration/Settings/Simple, Normal or Advanced:
This menu is also used to activate functions such as
•
the logger,
•
the inputs/outputs,
•
the totalizers.
To activate these options, place the cursor on the line corresponding to the required option and use the <
and > keys.
5.3.1 Flow meter menu (“Settings” mode)
Depending on the type of flow meter and the configuration mode (simple, normal or advanced) selected, the
flow meter menu may change. Below is a non-exhaustive list of the sections for the flow meter:
•
CONFIGURATION: configuration of the operating modes, the registration name, the JBUS/MODBUS
characteristics; configuration management, etc.
•
PIPE/FLUID CONFIGURATION: setting of the type of fluid, the pipe, the chords, the geometry of the
chords of the measuring point, etc.
•
TOTALIZER CONFIGURATION: configuration of totalizers.
•
INPUT/OUTPUT CONFIGURATION: configuration of inputs and outputs.
•
LOGGER CONFIGURATION: configuration of the logger.
•
LINEARISATION CONFIGURATION: configuration of linearisation.
•
FUNCTION CONFIGURATION: settings of the inputs for the function engine. This menu is only
available on request for specific applications.
•
ADVANCED CONFIGURATION: settings of the simulation mode, the special probes, the specific
codes for ultrasonic treatment, etc.
•
ECHO DISPLAY: display of the echo signals of the ultrasonic probes.
•
FIRMWARE UPDATE: update of the firmware.