Ultraflux Uf 811 CO, Руководство пользователя, Страница: 75 / 106

75
NT UF 811 CO GB (c) / March 2014
 In the "Channel" drop-down menu
o
"Channel" tab: time constants, flow graph settings, display options, etc.
o
"Chord" tab: definition of the probes, positions of the chords, etc.
o
"Advanced chord" tab: definition of specific codes used to fine-tune the behaviour of the
flow meter (contact Ultraflux before modifying these settings).
o
"Section" tab: definition of the geometry of the measurement section.
o
"Hydraulic profile" tab: settings of the measurement section hydraulic profile.
o
"Level" tab: number of level measurements and assignment of the inputs.
o
"Height/velocity" tab: definition of the operation of the flow meter in low water mode.
o
"Linearisation" tab: flow rate linearisation coefficient.
Once configuration is complete, upload the configuration to the flow meter by clicking this button.
Comment: On opening the settings window, the configuration loaded in the PC is the current configuration
of the flow meter.
2) "General" tab (in the "General" drop-down menu)
The settings window is used to configure the flow meter from the PC. As with the keypad, you can choose
the level of complexity using the command: General/Application Selection/Level = Simple, Normal or
Advanced.
The screenshot below shows an example of settings in Advanced mode. All parameters displayed below are
described previously in this document (see Chapter 5).
The software allows the date and time of the UF 811 to be synchronised with the date and time of the host
PC: select the option "Synchronise with PC time" before saving the settings on the flow meter.
It is important to correctly set the date and time in order to time stamp the records (country, summer/winter
time).