Ultraflux Uf 811 CO, Руководство пользователя, Страница: 26 / 106

26
NT UF 811 CO GB (c) / March 2014
The connector used is a female 4-pin M12 type connector with Speedcon A-standard coding.
View of the base
The pins have the following functions:
Recommended length to strip, tightening torque and cross-section of cable:
Cross-section of conductor 0.25 mm² … 0.75 mm²
Cross-section of AWG conductor 24 … 18
External diameter of cable 6 mm … 8 mm
Tightening torque Wrench M12 0.4 Nm
Tightening torque Screw terminals 0.2 Nm
Tightening torque Set screw 0.8 Nm … 1 Nm
Plug fitting:
Thread on the parts.
Strip the cable by 35 mm.
Strip the conductors by 4 mm.
Splay the armour and place it around the protector ring.
Cut off the excess braiding.
Feed the wires through the box.
Fit the armour, the packing and the ring clip.
Turn the set screw to fasten the cable in place.
Screw down the conductor wires.
Fit the connector.
Firmly tighten the set screw.
Pin Function
1 VIN + 10-32 VDC
2 not connected
3 VIN – 0V
4 GROUND