NT228B GB2
19 / 98
4.4
Using the Keypad:
> See also the short form User’s Guide NT 227
After switching
ON
(Long Press on the right side button), the UF 801-P displays its
configuration (serial Nr, Hardware/Firmware revision), its actual main settings
(with probe reference) and starts automatically in the Measurement mode menu:
Q / Graph / Flow information (*).
If the unit is already set up for the expected use, there is no need of extra-
programming: only read the results in the screen that you can select by pressing
V or
(
up/down), after probe installation and connection.
(*) To select a measurement screen
“by default”,
display it
and then press
Menus header access:
Press , and repeat it to go the next screen,
or travel with or
A short press accesses to the different menu headers.
A long press returns back to measurement menu.
To enter a menu
, press or
To change a page,
press o
r
To change a line,
select it with or
To modify value or text
, use or
If no button is pressed for a long time (1 to 10 mn following the version)
, the display returns automatically to the measurement display screen
that was selected with B (see * above).
F
+
-
V
A
B
V
+
-
B
Содержание UF 801-P
Страница 40: ...NT228B GB2 40 98 8 DUAL PIPE VERSION UF 801 PB 8 1 Introduction to UF 801 PB 8 2 Complementary screens Contents...
Страница 59: ...NT228B GB2 59 98 12 TOTALIZERS 12 1 Description Contents...
Страница 67: ...NT228B GB2 67 98 14 TIMER SEQUENCER 14 1 Settings Contents...
Страница 87: ...NT228B GB2 87 98 19 BATTERY CHARGER 19 1 Battery Charger 19 2 Battery pack whole life Contents...
