Installation and maintenance manual
E
N
G
LI
S
H
ULTRAFLEX
B505
page 13
of 15
4 SAFETY WARNINGS
This section shows the safety regulations to be applied for proper use of the apparatus. Read this section
very carefully and also read the manuals supplied with other components of the single lever control.
4.1 Safety during installation and use
PLEASE FOLLOW CAREFULLY the precautions and safety criteria indicated below.
ULTRAFLEX
shall not be held liable for the user’s failure to observe these precautions and criteria and shall not
be held liable for any negligence in use of the system.
- NEVER PUT YOUR HANDS BETWEEN MOVING PARTS
- Do not desactivate safety devices or make them non-operative.
- Do not modify the system or add devices to it without written authorization or the intervention of
an
ULTRAFLEX
technician describing the change made in the description of the work performed.
- Do not use the apparatus for any purpose other than its intended use as specified in the
installation and maintenance manual.
- Do not allow untrained personnel to perform installation.
- During installation of the system, take particular care to keep everything clean to ensure that no
foreign bodies can get into the system. Even a tiny object can cause permanent damage which may not
be immediately obvious.
- Do not let wires come into contact with sharp corners or edges.
- Do not let wires come into contact with heat sources.
4.2 Clothing
DO NOT wear necklaces, bracelets or any loose garments that could get caught in moving parts during
installation, inspection or maintenance work.
DANGER
IMPORTANT
IMPORTANT
