Installation and maintenance manual
E
N
G
LI
S
H
ULTRAFLEX
B505
page 11
of 15
If the B505 lever has the Trim switch, it is possible command the position of the Trim Tabs on the stern of
the boat.
3.2 Trim Switch Neutral Safety Lock
The B505 can be supplied with the Trim Switch or the Neutral Safety Lock underneath the handle.
3.2.1 Trim Switch
The B505 lever can install the Neutral Safety Lock instead of the Trim Switch.
3.2.2 Neutral Safety Lock
The Trim Switch has three positions:
- Top: move up the blades on the stern of the boat
- Center: the blades remains into the position desired
- Bottom: move down the blades on the stern of the boat
The top and the bottom positions are temporary positions.
Trim Switch
Neutral Safety Lock
This system locks the lever in the neutral position to avoid moving the lever accidentally. If the lever comes
back into the neutral position, the neutral safety lock will block the lever automatically.
A wrong connection can cause serius injuries.
IMPORTANT
