Installation and maintenance manual
ULTRAFLEX
E
N
G
LI
S
H
page 8
of 15
B505
2
1
Refer to the footprint dimensions given in point 1.2 to check that the control can effectively be installed
in the desired position. Install the mechanism after connecting the wiring if you have not access to the
bottom of the control when installed. Take care not to damage the sensor during installation.
After determining the appropriate location, cut the hole required to install the control using the
template provided.
2 INSTALLATION
Phillips screwdriver (ø4)
and flat-tip screwdriver (ø6)
Dispose of packaging in accordance with the law.
WARNING
Ellen Wrench (Ø3)
Ellen Wrench (Ø4)
2.1 Tools required
2.2 Installation of the control on the dashboard
