background image

3 Year Warranty Available on Certain Products - See Dealer For Details.

The manufacturer warrants to the original purchaser of  their remote starters and alarms, that the product shall be free from 
defects in material and workmanship. However, should this product be proven to be defective, within a two year period from 
the original date of purchase, the manufacturer  will, without charge to the purchaser (excluding any charges incurred to have 
the product delivered to the manufacturer) , repair or replace any part of the remote starter and/or alarm which the 
manufacturer agrees to be defective.  All warranties apply on to the original   purchaser and the vehicle in which it is originally 
installed. Repairs or replacement of defective modules shall remain at the discretion of the manufacturer. All other parts, 
components, accessories and/or optional equipment pertaining to the remote starter and  alarm are not included in the 
manufacturer’s  warranty. 

This warranty is non-transferable

. Request for warranty service from any Factory Authorized 

Dealer 

must be accompanied with the original purchase receipt or have product registered by authorized dealer on 

manufacturer’s website

.  Failure to comply with any of these conditions may result in warranty being voided.

This warranty does not cover the following: removal and reinstall labour charges, shipping charges, abuse, misuse, or 
accidental damages to the remote starter and alarm, automobile, and/or parts there of. This warranty is void upon 
modification, repairs, or alterations of any part of the System. The manufacturer does not guarantee or insure against theft of 
the vehicle or its contents. Alarm models are designed only to act as a deterrent against possible theft. This alarm may qualify 
for auto insurance discounts, contact your Insurance Agent for further information . The manufacturer shall not be held liable 
for any consequential damages due to breach of this or any other warranty, expressed, or implied.  This warranty gives you 
specific legal rights. Your specific legal rights may vary for each region.

CERTAIN DAMAGES EXCLUDED

  -  

The manufacturer expressly disclaims any liability or responsibility for incidental 

damages caused by the product, including economic loss, loss of use of the product, car rentals, or any other costs relating to 
the care and custody of the product. The manufacturer disclaims liability or responsibility for any consequential damages 
caused by the product or resulting from its use, including the cost of repairing or replacing other property damaged by the 
product or caused by its use, whether or not the product is working properly. The product is intended to deter unauthorized use 
of the vehicles in which it is installed.  The manufacturer does not warrant that the product is fool-safe against theft and/or 
vandalism and/or human error or misuse.  The manufacturer accepts no liability or responsibility for any damage of any kind 
whatsoever caused to any vehicle in which the product is installed or any resulting damage from its use.  The manufacturer   
accepts no responsibility or liability for any damage resulting to or theft of the vehicle or its contents, caused or alleged to be 
caused, directly or indirectly, by failure of the product.

WARRANTY

Start Fault Indicator 

If the Key Icon in the remote’s Program Menu is flashing, the remote starter has been disabled.
This can be because of various inputs including hood open, brake active, tach lockout or the
system is in Service Mode (Valet Mode).

When the remote start button is pressed in this mode, the remote will respond by giving 3
beeps and flashing the Key Icon in the Program Window.  The Key Icon on the top of the 
display will not be illuminated.

Note: The vehicle’s start fault condition must be corrected in order to remote start.

Self Learning Shock Sensor

1) Press the button #1 on the remote five times in a row  The siren should chirp three 

times and the park lights should turn 

On 

and remain

 On 

while in Learn Mode.

2) While the park lights are On, strike the vehicle with a sharp impact at the force 

desired trigger the alarm.

3) The system will respond with one siren chirp to confirm the impact has been learned. 

Note: To exit Learn Mode, press the button #1 on the remote transmitter.

1

Owner’s Guide

Содержание 4500









Отзывы: