Owner’s Guide
LCD DISPLAY
PROGRAM ICON
This icon will be displayed on the LCD screen until the user program mode is
accessed. While in user program mode the letter “P” from the icon will disappear. The
letter will re-appear when user Program Mode is exited.
TELEPHONE ICON (Timer Mode)
When this icon is displayed in the left program column if confirms that the Cold
Temperature Mode or Timer Mode has been programmed ON.
SHOCK SENSOR ICON
This icon indicates the status of the shock sensor delete feature. Shock sensor delete
allows the user to deactivate the shock sensor. If the icon is present on the LCD
screen the shock sensor is active. If the icon is not present on the LCD screen the
shock sensor delete feature has been activated and the sensor will be deactivated until
programmed on.
KEY ICON
This icon indicates the status of the remote starter. When Key Icon is ON, the remote
starter will not activate. See diagnostics
Note: This Icon is not used in Transmitter Program Mode
.
SIREN ICON(Chirp Delete)
This icon indicates the status of the chirp delete feature. If the icon is on, the siren will
work normally. If the icon is not displayed on the LCD the chirps delete feature is on
and the siren will not chirp.
Note: Chirp delete disables the Lock and Unlock chirps Only.
SERVICE MODE ICON
This icon indicates the status of the Service Mode feature. If the question mark icon is
present, the system is in Service Mode. (Valet Mode).
Note: While in service Mode, only the keyless entry features of the system will
still operate.
#
?
USER PROGRAM MODE
User Program Mode allows the user to program system features from the remote
transmitter. The following icons will be displayed on the LCD screen to determine the
status of the feature.
To Enter User Program Mode
1. Press and hold button
#4
for three seconds. The remote will respond with two beeps.
2. The system is now in User Program Mode. The telephone icon will begin to flash.
3. Press button #1 to scroll the list of features. Selected feature icon will begin to flash.
Press button #2 to turn the feature icon Off.
Press button #3 to turn the feature icon On.
4. Press button #4 to exit program mode and save settings.
Note: If the remote is not used for 20 seconds the system will exit Program Mode.
NUMBER ICON(Dual Car Operation)
This icon indicates the status of the Dual Car Operation mode. When the icon is off
the remote will operate car one. When the icon is on the remote will operate car two.
*This icon is not used in transmitter Program Mode.
