background image

Owner’s Guide

Car Finder Mode.

1.   Press and hold Buttons #2 and # 3 together for two seconds. 
2.  The system will flash the park lights and chirp the siren  five times. 
3.  The remote will beep and display the systems current status.

5th Channel Activation.

1.    Press and hold Buttons #2 and # 3 together for two seconds. 
2.  The park lights will flash five times. 
3.  The 5th channel output will activate. The   remote will beep and display the systems current status.

Note: The siren will not chirp when the 5th Channel Output is activated.

1. Press and hold the Trunk Release button (Button #2) for three seconds.
2. The doors will unlock and the Trunk Release will activate. The Trunk Release will then be 

confirmed by 2 park light flashes.

3. The remote will beep once then beep twice to confirm the Trunk Release was activated.  The Trunk 

icon will then appear on the LCD screen for 5 seconds.

4. For safety reasons, the Trunk Release output will be disabled and will not activate when ignition 

key is in the “On”  position.

1. Press and  release Button #1 on the Remote Transmitter. 
2.  The park lights will flash and the siren will chirp time.
3.  The remote will beep once to confirm. 
4. The doors will lock.
5.  The LOCK icon will appear on the LCD display of the remote.
4. The LED’s on the antenna will start flashing within five seconds

.

1.  Press and release Button #1 on the remote transmitter. 
2.  The park lights will flash 2 times and the siren will chirp twice.
3.  The remote will beep twice to confirm. 
4. The doors will unlock.
5.  The UNLOCK icon will appear on the LCD display of the remote.
4. The LED’s  on the antenna will stop flashing within five seconds

.

Lock Doors And Arm The Alar m

Unlock Doors And Disarm The Alar m

Trunk Release

Car Finder Mode / Optional 5th Channel

BASIC OPERATIONS

ACTIVATE PANIC MODE

1. Press and hold 

 

Button  #1 for three seconds.

2. The park lights will flash and the siren will activate. 

PANIC MODE DISABLE

   - Press and release Button #1

 

 to disable the Panic Mode and to lock the doors.

   - Press and release

 

Button #1 to disable the Panic Mode and unlock the doors.

Note: Panic Mode will stay activated until disabled by the remote transmitter.

Panic Mode

Содержание 4500









Отзывы: