7
owner´s manual
Frame Height
2.5 cm / 1 inch
Clearance
Inside Leg Height
HYBRI
D
HYBRI
D
Rahmenhöhe
Rahmenhöhe
Innenbeinhöhe
3.4 Seat height adjustment
The seat height may require adjustment. Ask your Ultra
Motor dealer to adjust it before you ride, however to adjust
the seat yourself follow these instructions:
To determine the correct height of the seat for the rider
1. Straddle the assembled A2B with your feet
shoulder-width apart and flat on the ground.
2. There must be at least 25 mm/1 inch clearance be-
tween the frame height (1) and the inside leg measure-
ment of the rider (2).
Height adjustment
1. The seat height can be adjusted with an appropriate
allen key by loosening the seat post fastening bolt.
2. After adjustment, check to ensure the bolt is tightly
fastened. DO NOT raise the seat beyond the ‘minimum
insertion’ mark on the seat pillar.
3. The seat post clamp should be secured at 10-12 Nm.
4.
Ensure the seat clamp bolt (seat pillar - seat post) is
tightened to 27 Nm.
5. After adjustment, ensure there is no movement in the
seat position in any direction.
Failure to correctly secure the seat can result in serious
or fatal injury.
• This owner’s manual makes no representation about the
safe use of the A2B under all conditions.
