8
3.5 Handlebar adjustment
1. Loosen the bolts A using
an appropriate allen key.
2. Position the handle bar
symmetrical to the bar stem.
3. Turn the handle bar to the
desired angle.
4. Tighten the bolts consistently
to 6 Nm.
3.6 Bar stem adjustment
Handlebar stem alignment
1. Loosen bolt B using an
appropriate allen key.
2. Once loose, align the
stem with the front wheel.
3. Once aligned, tighten
the bolt B to 17-18.5 Nm.
Change the angle of the adjustable-rise stem
1. Loosen bolt B using an
appropriate allen key.
2. Position the stem to the
desired angle.
3. Tighten bolt B to 17-18.5
Nm ensuring the stem is
aligned to the front wheel.
Caution: this is an A-head stem, the top bolt C is a pre-load
and does not adjust the handlebar stem.
Failure to correctly secure the bar stem can result in
serious or fatal injury.
Ensure there is no play in the steering and that the
steering is working smoothly.
Should you need further advice to adjust the headset,
please contact your Ultra Motor dealer.
A
B
C
B
C
