28
Re-installing rear wheel
Reverse the removal instructions (8 -1).
A. Re-install the torque arm. Failure to do so will result in damage
to the frame.
B. Ensure that the rear wheel is properly centred in the frame
before securely tightening the axle nuts to 60 Nm.
C. Ensure that the brake disc is correctly inserted in the
brake calliper, and the wheel rotates freely without
interference from the brake pads.
If you are unsure about this brake set-up and
adjustment procedure, please take your A2B to your Ultra Motor
dealer and ask for assistance in adjusting the brakes. Improperly
adjusted brakes may cause reduced braking performance,
leading to an accident that could result in serious or fatal injury
and/or property damage. DO NOT ride your A2B if you are not
confident that the brakes are working properly.
D. Ensure correct replacement
of the chain on the front and
rear chain rings.
E. Install the cable clips for the
motor cable to the frame.
B
E
