6
3.2 Changing components or adding accessories
Before installing any component or accessory, including a
different tyre, make sure that it is compatible with your A2B
by checking with your Ultra Motor dealer.
Read, understand and follow the instructions that
accompany the component or accessory you purchase
for your A2B. Follow the component manufacturer’s
instructions if they conflict with these instructions.
As with all mechanical components, the bicycle is
subjected to wear and high stresses. Different materials
and components may react in different ways to wear or
stress fatigue. If the design life of a component has been
exceeded, it may suddenly fail possibly causing serious
or fatal injuries to the rider. Any form of crack, scratches
or change of colouring in highly stressed areas, such as
frame, fork and handle bar, indicates that the life of the
component has been reached and it should be replaced
immediately by an Ultra Motor dealer.
Failure to confirm with compatibility, proper installation,
operation and maintenance components or accessories
can result in serious or fatal injury.
Using non-genuine components or replacement parts
may compromise the safety of your A2B and void the
warranty.
If you change components or add accessories, you
do so at your own risk because Ultra Motor may not have
tested that component or accessory for compatibility,
reliability or safety on your A2B.
3.3 Brake lever adjustment
Can you comfortably operate the brakes? If not, take your
A2B to an Ultra Motor dealer and ask them to adjust the
angle of the brake levers.
Alternatively, follow the instructions below to adjust the
brake lever angle:
1. Loosen the bolt underneath the brake lever with an
appropriate allen key.
2. Adjust the angle to suit.
3. Tighten up the bolt underneath, ensuring the brake lever
is firmly fixed in place.
Should you need to adjust the brakes themselves,
please take your A2B to an Ultra Motor dealer to make the
required adjustments.
