ultra-hyperspike
MPA400-MAN-IPFORMER Rev B | Copyright © 2020 USSI
See cover page for export control
Page 8
2. MOUNTING THE MPA400 SYSTEM
2.1 Mounting
The MPA400 uses a NEMA 1 housing and is to be located indoors in a climate-controlled building. When
mounting the housing, note the CCA orientation in the housing. It is recommended that the housing is
mounted such that connections are made on the same end as the connectors on the CCA. Fasten the
MPA400 to the wall surface using appropriate fasteners for the wall. Always follow local codes and safety
practices.
Wall fasteners not included.
Figure 3
– Mounting
