ultra-hyperspike
MPA400-MAN-IPFORMER Rev B | Copyright © 2020 USSI
See cover page for export control
Page 17
Figure 13 - Update Page
Once the package is downloaded:
1)
Connect to the MPA400’s web user interface
2) Navigate to UPDATE from the top bar
3) Click on "Please click here to start the update"
4) In the following page click on "Browse", locate the TAR package you just downloaded on your PC
and open it
5) Click on "Upload" - Wait few minutes while the process moves forward. Do not switch off the device
while the process is ongoing
6) When finished the message "Update completed" appears
7) The device will automatically reboot. After the device reboots, click on the home button and refresh
the page. You may need to empty the cache of your browser to display the new application.
4.7 Restore Factory Defaults
There 2 reset methods available on the MPA400:
•
Soft reset from web user interface
•
Hard reset from the front Reset button on the device
