ultra-hyperspike
MPA400-MAN-IPFORMER Rev B | Copyright © 2020 USSI
See cover page for export control
Page 4
IMPORTANT
The HyperSpike MPA400 contains parts and assemblies susceptible to damage by electrostatic
discharge (ESD). Use proper grounding techniques when working in the module.
1. OVERVIEW
1.1 Compatibility
The HyperSpike MPA400 system interfaces with the following HyperSpike direct drive speakers.
90243A-802-XX
– LineWave 4 speaker (8 Ohm)
90243A-803-XX
– LineWave 8 speaker (4 Ohm)
90219A-801-XX
– TCPA-10 (8 Ohm)
The Hyperspike MPA400 is compatible with all POE Types (1-4). The models listed below were used to
define product performance and specifications. Acoustic performance may vary based on the make and
model of the selected switch.
PoE
– Netgear GS108PE
PoE+
– Netgear GS108PP
4PPoE (Type 4)
– Cudy POE400 PoE Injector
1.2 Description
The MPA400 system is an audio over IP decoder which includes an amplifier for digital streaming to
HyperSpike
®
Line Wave and TCPA-10 (direct drive) audio speakers. Depending on the specific application,
it is capable of outputting up to 20W when powered with PoE+ and 40W when powered by 4PPoE or the
optional 24V power supply.
Table 1: Optional Accessories Installed On-Site
Part Number
Description
72813B-801
24VDC PowerSupply
