Ultra electronics HyperSpike MPA-400 Скачать руководство пользователя

Страница: 18 / 21

ultra-hyperspike

See cover page for export control

Page 18

Soft Reset

A soft reset restores all parameters except the network settings. To reset the device including network
settings perform a Hard Reset.

1) Connect to the web user interface of the MPA400 and navigate to the DEFAULTS tab.

2) Click on Reset Factory Defaults to perform a reset of the device.

Figure 14 - Defaults Page

Hard Reset

A hard reset restores all values and settings on the MPA400. To perform a hard reset:

1) Press the reset button located in the front panel of the device for approximately 10 seconds.

2) The green LED will flash 3 times to confirm reset operation.

3) Once the process is complete, the device will reboot.

4) The network settings will have been restored.

Note: The IP address may have changed, listen to the SonicIP® announced over the audio
output to verify IP address.

Содержание HyperSpike MPA-400






















Результаты поиска

Содержание HyperSpike MPA-400

Отзывы:

Похожие инструкции для HyperSpike MPA-400

Бренды по названию

Популярные бренды

Ultra electronics HyperSpike MPA-400, Руководство по установке и обслуживанию

Результаты поиска

Содержание HyperSpike MPA-400

Отзывы:

Похожие инструкции для HyperSpike MPA-400

Бренды по названию

Популярные бренды