ultra-hyperspike
MPA400-MAN-IPFORMER Rev B | Copyright © 2020 USSI
See cover page for export control
Page 16
•
Update Function:
Enable or disable the possibility to update the device from web user interface
(button grayed out)
4.5 Network Settings
In the MPA400 Settings page there are parameters used to configure your device with the desired network
settings. To set the network settings:
1) Wire your MPA400 to a network where a DHCP server is available and switch it on, hear the IP
announced over the audio output (SonicIP® function) and connect to its web browser.
2) Locate the Network Settings in the "Settings" menu.
3) Once settings are configured as desired click on Submit at the bottom of the page, the device will
restart and if the IP is changed you must input the new address in the top bar
Figure 12 - Settings Page - Network Settings
4.6 Update the Firmware of MPA400
It is always good practice to run the latest firmware on the MPA400. The latest Firmware includes
improvements and bug fixes. The firmware on the MPA400 can be updated using the local web interface.
To update the firmware from the web user interface you need first to download the TAR package from the
Barix website: www.barix.com/downloads (Firmware is under Products → Decoder → IP Former) or simply
type: IP Former in the search bar in the same page. In this page, only the latest firmware from Barix is
available.
