ULTIMATE SPEED ULGD 10 A1, Перевод оригинальной инструкции

Страница: 46 / 170

45 GB/IE
If the 24 V battery is deeply dis-
charger (below 15.6 Volt), then the
charger recognises the battery as a
12 V battery. In this case, the
program selector button
8
must be
pressed seven times, to select
program 7.
The
24V
2
and
2
5
symbols
are shown on the LC display. During
the charging process, the charging
display
9
flashes. The progress of
the charging process (1-4 bars) will
be shown on the status display
10
.
When the battery is fully charged,
the status display shows
10
4 bars.
The flashing stops and the device
switches to trickle charging automat-
ically. The display will show “FUL”.
Program 8
24V
2
(29.4 V / 5.0 A)
To charge 24 V batteries with a
capacity of 40 Ah to 100 Ah under
cold conditions or to charge AGM
batteries.
To maintain the charge of 24 V
batteries up to 150 Ah.
Press the program selector button
8
four times to select Program 8.
If the 24 V battery is deeply dis-
charger (below 15.6 Volt), then the
charger recognises the battery as a
12 V battery. In this case, the
program selector button
8
must
be pressed eight times, to select
program 8.
The
24V
2
,
2
5
and
6
symbols are shown on the LC
display. During the charging pro-
cess, the charging display
9
flashes. The progress of the charg-
ing process (1-4 bars) will be shown
on the status display
10
. When the
battery is fully charged, the status
display shows
10
4 bars. The flash-
ing stops and the device switches
to trickle charging automatically.
The display will show “FUL”.
Program 9
12V
(13.6 V / 3.0 A)
Supply program 13.6 V / 3 A max.
Press the program selector button
8
nine times to select Program 9.
The
12V
3
and
7
symbols are
shown on the LC display.
For use as a 12 V voltage supply
or for buffer maintenance charg-
ing, where 100% battery power is
necessary. Das supply program will
work without a time limit.
Please contact the vehicle manu-
facturer and read the operating
Using the device