ULTIMATE SPEED ULGD 10 A1, Перевод оригинальной инструкции

Страница: 32 / 170

31 GB/IE
VEHICLE BATTERY CHARGER
ULGD 10 A1
z
Introduction
Congratulations! You have pur-
chased one of our high-quality
products. Please familiarise yourself
with the product before using it for
the first time. To do so, please read
through the following operating and
safety instructions carefully.
KEEP OUT OF THE REACH OF
CHILDREN!
z
Intended use
The Ultimate Speed ULGD 10 A1 is
a multi-level vehicle battery charger,
which is suitable for charging and
trickle charging 12 V- (6 cells) or
24 V (2x6 cells) lead acid batteries
with electrolyte solution (WET), with
electrolyte absorbing mats (AGM),
with gel gel-type electrolyte (GEL)
or calcium batteries. The device is
not suitable for charging lithium-ion
batteries!
You can also regenerate discharged
batteries (depending on the battery
Table of pictograms used / Introduction
Table of pictograms used
Suitable for the charging
of 12-V batteries
24 V
Suitable for the charging
of 24-V batteries
Direct current Protection class 2
12V
12 V mode
(Program 1, 2, 3, 4 and 9)
24V
24 V mode
(Program 5, 6, 7, 8 and 10)
+
-
1
2
Disconnect from the mains
before closing or opening
any of the connections to
the battery.
Ensure sufficient
ventilation when
charging!
+
-
1
2
Connect the battery
first, then establish the
connection with the mains!
Protect electrical
connections from rain!
Avoid flames and sparks! Do not smoke!
Winter – AGM – Mode
(Program 2, 4, 6 and 8)
Supply program
(Program 9 and 10)