Ultimaker Ultimaker S5 Pro Bundle, Инструкция по установке и эксплуатации

Страница: 7 / 52

Ultimaker S5 Pro Bundle user manual 6
Electrical safety
Ultimaker products have been tested according to the IEC 62368-1. All relevant products have undergone and
passed Hi-pot testing before shipment. This test guarantees the right level of insulation against electrical
shock. An earthed mains socket must be used. Be sure that the building installation has dedicated means for
over-current and short-circuiting. For more information, please visit our website for the CB certificate. The
printer is powered by mains voltage, which is hazardous when touched. This has been marked with a high-
voltage symbol on the bottom cover. Only trained staff should remove the bottom cover.
Always unplug Ultimaker products before performing maintenance or modifications
Mechanical safety
Ultimaker products are compliant with the Machine Directive 2006/42/EU. The EC declaration of conformity can
be found on our website. The Ultimaker S5 contains moving parts. No damage to the user will be expected
from the drive belts. The force of the build plate is large enough to cause damage, so stay out of the reach of
the build plate during operation.
Always unplug the Ultimaker products before performing maintenance or modifications.
Risk of burns
There is a potential risk of burns: the print head of the Ultimaker S5 can reach temperatures up to 280 °C, while the
heated bed can reach temperatures of 140 °C. Do not touch either of these parts with your bare hands.
Always allow the Ultimaker products to cool down for 30 minutes before performing
maintenance or modifications.