Ulma ENKOFORM VMK, Руководство пользователя

Страница: 38 / 82

ENKOFORM VMK

Construcción
38


ENKOFORM VMK
4.5.2.1
To connect 2 PANELS with a
COMPENSATION PLATE between them
PANELS on both sides do not need to have the edges
cut in chamfer. The COMPENSATION PLATE is leaned
on the concreting face of the BOARD.
COMPENSATION PLATE between 2 PANELS.
Detail of the COMPENSATION PLATE.
4.5.2.2
To correct assembly errors of walers in
PANELS
Some errors could be made when assembling
PANELS (for example, misplacing the WALER MK-
120 in height). Therefore, when 2 of these PANELS
were placed next to each other, their MK-120
WALERS would not match in height, and it would
bring problems to join the two PANELS.
The gap between the width of the ADJUS.
COMPENSATION CONNECTOR MK and the hollow
of the WALER MK-120 allows an 8 mm error
tolerance.
The PANEL CONNECTOR is designed in such a way
that whenever it works in this range, the
CONNECTOR will work in a proper way. If the
assembling error is bigger, it will not be possible to
introduce the PANEL CONNECTOR in the joint.
Error range of assembly that absorbs the ADJUS. PLATE
CONNECTOR MK.
8
8