Ulma ENKOFORM VMK, Руководство пользователя

Страница: 15 / 82

ENKOFORM VMK

Construcción
15


ENKOFORM VMK
WALERS MK-120:
The real length is 12 mm shorter than the one
indicated in the name.
They have long and round holes along the profiles. In
vertical formwork, the mainly used holes (with
WEDGES MK) are the long ones (125 mm gap
between them).
Distances between the long holes.
Geometry of the section.
VM20 BEAMS:
The BOARD of the PANEL will lay on the VM20
BEAMS.
WALER-VM20 CLAMP 2T:
It joins the BEAM VM20 to the WALER MK-120.
LIFTING BRACKET E V-100:
It makes possible to shift the PANELS. Each PANEL
will have 2 E V-100 LIFTING BRACKETS.
BOARD:
It is the PANEL surface in contact with the concrete.
It can be 3 layer (27mm) or plywood (18-21 mm).
Depending on the type of BOARD, it can be used
more or fewer times.
WOOD PLANK:

It is placed on the upper part of the PANEL to
absorb the horizontal forces when lifting.

It is placed on the bottom part of the PANEL to
protect the ends of the VM20 BEAMS from a
possible damage.
125
125
125
162
55 52 55
120
60
60
10
4
68
5