Copyright
2003.08 ULFA TECHNOLOGY CO.,LTD
http://www.ulfatech.com
6
PEAK
P
PEAK
P
PEAK
P
PEAK
P
PEAK
P
PEAK
P
PEAK
P
PEAK
P
PEAK
P
20mA current setting
e
u
l
a
v
This function is set pressure level to 20mA current
out, That is set span.
PLT can be set
any
pressure level to 20mA current out between low
and high pressure ranges.
Low and high pressure ranges are setting in factory.
Recall to Factory setting
This function is recall to initial states of factory
out from unmatched user parameters that zero,
span etc.
Press MODE key for
more than 3 seconds till
appear "Int" on LED
display.
Press MODE key once
till appear "P20" on
LED display.
Set your pressure level
to 20mA current out use
up/down key
Press ENTER once to
save and exit to measure
mode.
Press ENTER key for
more than 3 seconds till
appear "SAvE" on LED
to save and exist in the
setting mode
Press MODE key for
more than 3 seconds till
appear "Int" on LED
display.
Press MODE key once
till appear "FACt" on
LED display.
Press ENTER once to
recall and exit to measure
mode.
Press ENTER key for
more than 3 seconds till
appear "SAvE" on LED
to recall and exist in the
setting mode
ID No setting
ID number is use for address for communication to
master. It's concern to PLT communication function
installed.(option)
Press MODE key for
more than 3 seconds till
appear "Int" on LED
display.
Press MODE key once
till
appear
"ID"
on
segment.
Set your ID No use
up/down key(0~255)
default set is 0.
Press ENTER once to
save and exit to measure
mode.
Press ENTER key for
more than 3 seconds till
appear "SAvE" on LED
to save and exist in the
setting mode.
ULFA TECHNOLOGY CO.,LTD
344, industrial zone ,201 haan 3-dong
kwang myung-city, kyung ki-do
423-754 KOREA
TEL:02-806-4403 FAX:02-806-4406
PLT / PLX Series
DIGITAL DIFFERENTIAL PRESSURE TRANSMITTER
PEAK
P
PEAK
P
PEAK
P
PEAK
P
PEAK
P
