UINICS SP-490 Series, Руководство по эксплуатации

Страница: 27 / 32

- 24 -
１１．Setting the alarm preset values
Set the preset values on the upper and lower limits in alarm output.
The setting range is -999 - 9999.
Operation key Indication Procedure
M Ａ Ｂ Ｃ Ｄ
ｏ ｕ ｔ １
Ｅ Ｆ Ｇ Ｈ
９ ９ ９ ９
Press the key for 2 seconds or more.
“
out1
”
appears in displays A-D and the preset
value setting for OUT1 is shown.
M
Ａ Ｂ Ｃ Ｄ
ｏ ｕ ｔ ２
Ｅ Ｆ Ｇ Ｈ
９ ９ ９ ９
Changes the OUT number.
Each time the key is pressed, the OUT number
goes up by one.
（out1→out2→out3→out4→out1→・・・）
. Ａ Ｂ Ｃ Ｄ
ｏ ｕ ｔ ２
Ｅ Ｆ Ｇ Ｈ
９
９
９ ９
→ → →
Shifts the flashing indication to the digit to the
right.
Each time the key is pressed, shifts the
indication to one right.
∧ Ａ Ｂ Ｃ Ｄ
ｏ ｕ ｔ ２
Ｅ Ｆ Ｇ Ｈ
９
０ ９ ９
Changes the value of the flashing digit.
Each time the key is pressed, the number goes
up by one.
（０→１→・・・→９→０→・・・）
RES After adjusting the setting, use this key to
register it. The display returns to the readings
following registration.
M ＋ . The display returns to the readings, without
registering.
When setting value has been changed by
mistake, use these keys.
Note 1：The decimal place of the reading is interlocked with Mode 00.
Note 2：Upon setting this mode, when pressing Up key during the setting of display
unit E, the next of 9 shows
“
－
”
display.（→９→－→０→）