Ugolini MT micro HOT, Руководство оператора

Страница: 17 / 20

17
lubricant.
figure 8
3
Assemble the faucet by reversing the
disassembly steps (see figure 7)
4
Fit bowl gasket around its seat.
Note: the largest brim of gasket must face
against the rear wall (see figure 9).
figure 9
5
Insert the magnetic outside rotor in the
evaporator taking care to accompany it to the
end (see figure 10).
figure 10
6
Install the outer spiral. Slide it over the
evaporator until its hexagonal front notch
engages with the hexagonal exposed end of the
magnetic outside rotor (see figure 11).
figure 11
7
Push the bowl towards the rear wall of the
unit until it fits snugly around the gasket and its
front fastening hooks are properly engaged (see