Ugin e.on sinter base, Инструкция по эксплуатации

Страница: 12 / 24

Instructions for use (rev 251121) e.ON sinter base
UGIN DENTAIRE 11
6. USE AND CONFIGURATION
6.1. WORKING INTERFACE
Following power up, the initialization interface appears on the screen.
The main screen automatically appears: menu
“Working interface”.
6.2. CONTROL KEYS
PICTURES KEYS DESCRIPTION
Start cycle
(RUN)
The selected program is started.
Pause
(PAUSE)
In running state, the program will be in a suspended state, the
temperature remains constant.
Stop
(STOP)
Under operating state or suspended state, the program will end.
Menu
(logo Microsoft)
Pull-down menu appears, as shown below:
Working interface Parameters current cycle display.
Real-time curve Display of the cycle curve (temperature/time).
Program editor Program settings.
Parameter setting Software settings. Only access with technician code (reserved for
technicians customer’s service UGIN DENTAIRE).
Language selection Available languages: English, French, Spanish and Italian.
Date setting Setting the date, time and day of the week.
6.3. REAL-TIME CURVE (CURRENT CYCLE)
This screen shows the diagram of the current cycle
(time/temperature).
On the screen are displayed two curves: the temperature
setting in the cycle
(blue curve) and the temperature in real
time (green curve) .
The green curve appears with the blue curve superimposed
with the temperature is regulated.