UFO 150 CDMX+G-DCT, Руководство пользователя

Страница: 7 / 24

7
UFo liGhTinG
insTallaTion
CONNECTION
There are 2 main connections required - the fiber port and the mains power supply. Connect and
secure the fiber optic connector to the fiber port before connecting the electrical supply. Never run
the illuminator with the fiber connector unplugged. For separate feed units, there will be
additional power connections required.
OPERATION
After installing and connecting the illuminator as described above, all you have to do is turn the
power on. The lamp will take 3-4 minutes to reach full brightness. This is normal for this type of il-
luminator.
During the power up sequence the software version number and the model version is displayed
momentarily as detailed below:
If no light is produced, please consult the TROUBLESHOOTING section in this manual.