UFO 150 CDMX+G-DCT, Руководство пользователя

Страница: 10 / 24

oPeraTion
10
The dmX+ illuminator has two modes of operation - standalone and dmX.
STANDALONE MODE
In standalone mode, the Compact DMX+ can be used in two ways - either as a single independent
illuminator or in master/slave configuration with several illuminators connected together using
DMX cables.
In master/slave configuration all addresses are set the same and whatever program is selected on
the master unit will also be executed on the slave units.
DMX MODE
Light sources set in DMX mode can either be controlled by another Compact DMX+ in master
mode, or by a standalone DMX controller.
PROGRAMMING THE ILLUMINATOR
The DMX+ can be programmed for various functions and modes from the rear panel controls as
shown on the following pages.
RESET VIA DMX
When resetting via DMX (Channel 1 - 128-191) care must be taken to ensure channels 2 to 5 are first
set to 0 value.
Failure to do this will result in the illuminator ‘freezing’. If a illuminator freezes in this way it can be
reverted to normal by cycling the mains power off and then on again.
150w Universal dmX+ User GUide