UFO 150 CDMX+G-DCT, Руководство пользователя

Страница: 6 / 24

insTallaTion
6
Verify that the supporting structure can safely bear the weight of all installed units, cables and any
other equipment.
For horizontal mounting, it is recommended that the illuminator is secured to a solid surface using
4 x M4 or M5 screws or bolts and the keyhole slots. This is particularly important if the illuminator
location is not at ground floor level.
To mount the illuminator vertically, first securely install 4 x M4 or M5 screws or bolts at the
required distances so that they will line up with the keyhole slots. The illuminator can then be
mounted onto them and slid into position. The bolts or screws MUST then be fully tightened.
To mount the illuminator under a surface, first securely install 4 x M4 or M5 screws or bolts at the
required distances so that they will line up with the keyhole slots. The illuminator can then be
mounted onto them and slid into position. The bolts or screws MUST then be fully tightened.
CLEARANCE
/
VENTILATION
It is imperative that a gap of 300mm or more is left around the unit. This is to allow air to circulate
and prevent overheating. The location must have free ventilation.
150w Universal dmX+ User GUide