UFO 150 CDMX+G-DCT, Руководство пользователя

Страница: 5 / 24

5
UFo liGhTinG
insTallaTion
In order for the DMX+ illuminator to function safely and efficiently it must be installed
according to this user manual. Please read all sections thoroughly before switching on
the illuminator.
POWER SUPPLY REQUIREMENTS
Before plugging in the unit, please make sure that the supply is correct. Failure to do so could
cause the unit to malfunction. The unit requires a 240VAC 50Hz supply and it MUST BE EARTHED.
The illuminator units are provided with a cordset fitted with a standard plug. UNIT MUST NOT BE
DIMMED.
POSITIONING THE UNIT
The illuminator can be mounted horizontally, vertically or upside-down on any flat surface.
Keyhole slots are provided on the base of the unit to allow for securing to a surface. The illumina-
tor is only suitable for use in a dry area.
If the unit is being mounted at a higher than the ground level, block access below the work area
before installing.
Verify that any screws or bolts can safely bear the weight of the illuminator.