uebe Visomat double comfort, Инструкция по эксплуатации, Страница: 37 / 91

D
EN-72 EN-73
D visomat
®
double comfort software visomat
®
double comfort software
english
english
Click in the main window of the double comfort software on “Import measure-
ment”.
Now the measured data from the user memories of the blood
pressure monitor are transferred to the program and assigned
to Users 1 and 2. When data transfer is completed, the mes-
sage “Data successfully imported!” appears. Confirm this
message by clicking on “OK”.
The blood pressure monitor stores up to 60 measurements for each user. To ensure
that no measured data are lost, you should in good time, but no later than after 60
new measurements, transfer the measured data from the monitor to the software.
The software can store an unlimited volume of data. You can therefore view and
evaluate older measured data.
Important: No new blood pressure measurements can be taken while the mon-
itor is connected to the PC. To take a new measurement, simply remove the USB
cable from the monitor. The letters “PC” disappear from the blood pressure moni-
tor’s display. Now you can take a new blood pressure measurement.
9. Evaluating the measured data
Click in User management on the user whose readings you would like to evaluate.
All the stored measured data for this user are displayed in the measured value
table.
By clicking on a column heading, you can sort the measurements by this criterion
in ascending or descending order. You can record a comment or remark in text
form for each measurement. To do so, highlight the measurement, click the right
mouse button and select “Process remark” to open the recording window. Enter
the comment in the window and click on “Delete”.
To delete individual measurements, highlight the desired message with the left
mouse button. Then click the right mouse button and select “Delete measured val-
ue”. Confirm the delete security question that now appears with “Yes“.