uebe Domotherm E, Инструкция по эксплуатации

Страница: 5 / 15

EN-8 EN-9
Operating the device Operating the device
Display
1 5
2 6
3 7
8
9
4
1 2 3
6
4
4
7
8
9
5
Ambient temperature
Cleaning reminder
Beep
Ready for measurement Time
Date Temperature unit °C (Celsi-
us)/°F (Fahrenheit)
Memory mode
Battery display
Initial commissioning of the device
Setting the date, time and temperature unit (°C/°F)
• Open the battery compartment (see page 17). Pull the transparent
battery contact separation strip that protrudes out of the battery
compartment and remove it from the housing in the direction indi-
cated by the arrow. Close the battery compartment again.
• The device turns on and switches to SET mode for entering the basic
settings (date, time, temperature unit).
Before using the device for the first time, set the
date and time so that the measurements can be
saved together with the date and time.
• During initial commissioning of the device or af-
ter replacing the battery, the device automatically
switches to SET mode for entering the basic set-
tings (Figure 1).
• Press the START button again. You are now able
to set the year (Figure 2).
• Press the MODE button to increase the year or the
MEMO button to reduce the year. Once the cor-
rect value is set, confirm the entry by pressing the
START button.
• To access SET mode manually, press and hold the
START button for at least five seconds with the
device switched off.
Figure 1
Figure 2
• You are now able to set the month. (Figure 3).
Press the MODE button to increase the value dis-
Figure 3