English
English
EN-62
EN-63
Technical information
Technical information
E
E
5. Metrological inspection
Generally, it is recommended that a metrological inspection is
performed every two years. However, professional users in Ger-
many are obligated to do so in accordance with the “Medical
Products Operator Ordinance” (Medizinprodukte-Betreiberver-
ordnung).
This can be performed either by UEBE Medical GmbH, an author-
ity responsible for metrology or an authorised maintenance ser-
vice. Please refer to your national regulations.
Subject to technical modifications.
• Cuff type US for an arm circumference of 17-25 cm
Part no. 2403005
PZN-00044960
• visomat
®
mains adapter
Part no. 2400020
PZN-11870684
Device serial number
Reference number = item number
Degree of protection against electric shock TYPE BF
Consult the instructions for use
Keep dry
6. Explanation of symbols
This product complies with Council Directive 93/42/
EEC of 5 September 2007 concerning medical devices
and bears the mark CE 0123 (TÜV SÜD Product Service
GmbH).
0123
Important: No modifications, e.g. opening the device (except to
replace the batteries), may be made to this device without the
manufacturer’s permission.
Upon request, responsible authorities or authorised mainte-
nance services receive a „Test instruction for metrological inspec-
tion“ from the manufacturer.
Please only submit the device for metrological inspection togeth-
er with the cuff and the instructions for use.
Mains adapter information
When using the optionally available mains adapter:
Technical equipment and batteries do not belong in
household waste. They must be disposed of at appro-
priate collection and disposal points.
Protection class II (double insulation)
Direct current
For indoor use only
Polarity inside plus
7. Disposal
Manufacturer
Protected against solid foreign bodies with a diameter
from 12.5 mm, no protection against water.
IP20
© Copyright Gebrauchs.info