UE 1XSWHH Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 23

background image

IM_1XSW-02

www.ueonline.com

2

Non-Incendive - Model 1XSWLL, 1XSWHL and 1XSWHH

N. America

Europe

International

Cert number:

UL File E226592

DEMKO 15 ATEX 1483

IECEx UL 08.0017X

Applicable
Standards

UL-60079-0, UL 60079-15, ISA 12.12.01,
CSA C22.2 No. 157-92, CSA C22.2 No.
213, CSA C22.2 No. 60079-0:11, CSA
C22.2 No. 60079-15:12

EN 60079-0:2012 +
A11:2013
EN 60079-15:Ed.10

IEC 60079-
0:Ed.6(2011-06) +
Corr.1 (2012-01) +
Corr.2 (2013-12)
IEC 60079-15:Ed.4

Suitable for ap-
propriate use in:

Class I, Div. 2, Groups A, B, C & D
Class II, Div. 2 Groups F & G
Class III
Class I, Zone 2 AEx nA IIC T5
Ex nA IIC T5

II 3 G Ex nA IIC T4 Gc

Ex nA IIC T4 Gc

FLAMEPROOF - SPECIAL CONDITIONS FOR SAFE USE

• Field wiring must be rated 105°C minimum. For ambient temperatures below -10°C, use suitable field wiring.
• Blanking elements from factory have been tested for flameproof “d” and dust “tb” with the enclosure as an assembly and carry no

markings.

• A suitable thermowell made from corrosion-resistant material and engaging 5 threads minimum (with thread sealant) is required for

the local spring loaded temperature sensor to maintain IP66

Flameproof joint and gap details

– Enclosure to cover threaded joint: 4” - 16 UN-2, 7 threads engaged minimum

– Glass to cover cemented joint: 0.753” (19.1 mm) rabbet/spigot minimum length

– Breather element threaded joint: M8-1.25 (6g/6H medium fit class), 11 threads engaged minimum

– Electrical conduit threaded joint: 3/4”-14 NPT, 5 threads engaged minimum

– Enclosure to sensor threaded joint:

•  Pressure models: 1”-20 UNEF-2, 10 threads engaged minimum
•  Temperature models: 1/2”-14 NPT, 5 threads engaged minimum
•  Remote and local spring loaded temperature sensor gap joints: 0.0045” (0.114 mm) maximum annular gap by

1.25” (31.8 mm) minimum length

• The Unit must be cleaned with a damp cloth to avoid static discharge.

Dual Seal Adaptor (Option M041)

•  Threaded Dual Seal Adaptor Option Enclosure to One Series Enclosure : 1”-20 UNEF-2, 10 threads engaged minimum
•  Breather element threaded joint: 1/4”-20 UNC-2, 10 threads engaged minimum
•  Secondary Seal Housing to union housing joint: 0 .580” (14.73 mm) rabbet/spigot minimum length, maximum annular gap 0.003

in. (0.08 mm)

• Sensor to union housing joint: 0 .580” (14.73 mm) rabbet/spigot minimum length, maximum gap 0.003 in. (0.08 mm)
• Threaded Dual Seal Adaptor option to Sensor 1”-20 UNEF-2, 10 threads engaged minimum or 1/2”-14 NPT 5 threads engaged

minimum.

INTRINSIC SAFETY - SPECIAL CONDITIONS FOR SAFE USE

•  Enclosure and cover are made from Aluminum Alloy, do not strike with heavy object.
•  Separation distances were assessed to Annex F.
•  Device must be powered by a galvanically isolated intrinsic safety barrier.

Table 1

«
1
2
3
4
...
»

Содержание 1XSWHH
























Отзывы:

Нет отзывов

Похожие инструкции для 1XSWHH

Бренд: Keithley Страницы: 434

Бренд: KELCO Страницы: 41

Бренд: Datavideo Страницы: 2

Бренд: Clas Ohlson Страницы: 5

Бренд: Black Box Страницы: 28

Бренд: ATEN Страницы: 17

Бренд: Eaton Страницы: 2

Бренд: Uniclass Страницы: 32

Бренд: H3C Страницы: 39

Бренд: N-Tron Страницы: 2

Бренд: Advantech Страницы: 209

Бренд: Huanyu Страницы: 10

Бренд: TRENDnet Страницы: 10

Бренд: Epson Страницы: 2

Catalyst Express 500 Series

Бренд: Cisco Страницы: 58

Бренд: mind alive Страницы: 16

Бренд: CYP Страницы: 44

Бренд: CYP Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды