ADDENDUM: CE MARK EXCLUSIONS
1.
The instrument is not intended for use in high humidity, high pollution, or explosive environments.
2.
The instrument and related accessories are “
CE
” compliant when operated in the manufacturer’s recommended
configuration, and in accordance with the exclusions described in this addendum. UDT Instruments does not
accept responsibility for “
CE
” compliance if the instrument is used in a non recommended configuration.
3.
All semiconductor devices are susceptible to electrostatic discharges (
ESD
). Ensure that the unit is switched off
before connecting or disconnecting any cable(s) or accessories. Failure to do so can cause “
ESD
” damage and
reduce the lifetime of the instrument drastically.
4.
Units with ieee-488 capability must use a shielded cable; similar to Hewlett-Packard part number HP10833x or
Io-Tech part number CA-7-X, to maintain compliance.
5.
All coaxial cables must be less than 3 meters long.
6.
All battery-operated units have batteries that
are not
replaceable by the customer, and can only be charged with
the battery charger supplied with the unit by UDT Instruments.
7.
Cleaning:
Special care must be used when cleaning the instrument. The body, or any labels, should only be
cleaned with a soft damp cloth, and a very light concentration of mild soap. Failure to do so may scratch the
surface or damage any anti-glare coatings.
Never use alcohol, acetone, or other chemical solvents to clean any part of the unit.
UDT Instruments • 8581 Aero Drive • San Diego, CA 92123
Phone (858) 279-8035 Fax (858) 576-9286
