4.1 MIC1 Connector Input
4.2 MIC1 Equalization
The MIC1 is a balanced input, with a XLR connector of 600 ohms.
The gain for the MIC1 input can be adjusted by using the knob
located on the rare part of the MX-800 audio matrix, as well as the
low and high pass filters.
4.
MIC 1 INPUT
LF
HF
MICROPHONE 1
GAIN
-8
+8
dB
-8
+8
dB
dB
1
2
3
PUSH
5mV-300mV/680
Ω
ZONE 2
MUSIC
MASTER
MIC1
2
2
2
3
3
3
4
4
4
5
5
5
0
0
0
1
1
1
6
6
6
7
7
7
8
8
8
10
10
10
9
9
9
SOURCE UP
SOURCE DOWN
PAGE BUSY
MIC1
PRIORITY
D
4.3. MIC1 Priority
Each of the 8 matrix outputs (MX-800), includes a priority button on the front
panel
that enables the MIC1 input to have highest priority against any input
signals of a specific zone. This selection is independent for each output and once
it is enabled, the MIC1 LED will be switched on.
In case the priority button is not activated, the MIC1 signal will be mixed with the
rest of the audio inputs of that specific zone.
D
ZONE
4.1
4.2
MX-800 REAR PANEL
MX-800
4
12
6
610.387A
rev.
2
